Toyota Camry manuals

Toyota
Toyota Camry
 Service Manual
Drive shaft / propeller shaft
Front axle lh hub bolt

REPLACEMENT

HINT:

  • COMPONENTS

  • Replace the RH side by the same procedures with LH side.

  1. REMOVE FRONT WHEEL

  2. DISCONNECT FRONT DISC BRAKE CALIPER ASSY LH

  3.  REMOVE FRONT DISC

  4. REMOVE FRONT AXLE LH HUB BOLT

a. Using SST and a screwdriver or an equivalent to hold, remove the front axle LH hub bolt.

SST 09628−10011


Remove front axle LH hub bolt

5. INSTALL FRONT AXLE LH HUB BOLT

  1. Install a washer and nut to a new front axle LH hub bolt as shown in the illustration.

  2. Using a screwdriver to hold, install the hub bolt by torquing the nut.

Install front axle LH hub bolt Install front axle LH hub bolt

  1. INSTALL FRONT DISC

  2. INSTALL FRONT DISC BRAKE CALIPER ASSY LH

  3.  INSTALL FRONT WHEEL Torque: 103 Nm (1,050 kgfcm, 76 ftlbf)

    More about Drive shaft / propeller shaft:

    Drive shaft, propeller shaft, axle (From July, 2003)

    Front axle hub sub-assy LH (From July, 2003)

    Front axle lh hub bolt

    Rear axle hub & bearing assy LH

    Rear axle LH hub bolt

    Rear axle carrier sub-assy LH

    Drive shaft, propeller shaft, axle (From July, 2003)

    Front drive shaft (From July, 2003)

    Toyota Camry Service Manual / Drive shaft / propeller shaft / Front axle lh hub bolt

    Toyota Camry Service Manual

    Categories


    2011-2019 Copyright www.tcamanual.com