Toyota Camry manuals

Toyota
Toyota Camry
 Service Manual
Engine hood/door
Luggage compartment door

ADJUSTMENT

1. INSPECT LUGGAGE COMPARTMENT DOOR PANEL SUB−ASSY

a. Check that the clearance is within the standard value.

  1. REMOVE LUGGAGE COMPARTMENT DOOR COVER

  2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT

  3. REMOVE SPARE WHEEL COVER ASSY

  4. REMOVE LUGGAGE COMPARTMENT SIDE COVER SUB−ASSY RH

  5. REMOVE LUGGAGE COMPARTMENT TRIM HOOK No.1

  6. REMOVE REAR FLOOR FINISH PLATE

  7. ADJUST LUGGAGE COMPARTMENT DOOR PANEL SUB−ASSY

  1. For forward/rearward and right/left adjustments, loosen the bolts.

  2. For a vertical adjustment of the door front end, increase or decrease the number of the washers between the hinge and door.

  3. Tighten the bolts after adjustment.

    Torque: 8.0 Nm (82 kgfcm, 71 ftlbf)

  1. Using a hammer and a brass bar, tap the striker to adjust it.

  2. Tighten the bolts after adjustment.

    Torque: 5.5 Nm (56 kgfcm, 49 ftlbf)

Luggage door hinge torsion bar

    More about Engine hood/door:

    Hood

    Rear door

    Luggage compartment door

    Luggage door hinge torsion bar

    Hood support rod

    Front door

    Toyota Camry Service Manual / Engine hood/door / Luggage compartment door

    Toyota Camry Service Manual

    Categories


    2011-2019 Copyright www.tcamanual.com