Toyota Camry manuals

Toyota
Toyota Camry
 Service Manual
Ignition
Camshaft position sensor (2AZ−FE)(From July, 2003)

REPLACEMENT

HINT: A bolt without torque specification is a standard bolt .

  1. REMOVE AIR CLEANER ASSY

  2. REMOVE CAMSHAFT POSITION SENSOR

  1. Disconnect the sensor connector.
  2. Remove the bolt and sensor.

Remove camshaft position sensor Remove camshaft position sensor

3. INSTALL CAMSHAFT POSITION SENSOR

  1. Apply a light coat of engine oil to the O−ring on the sensor.
  2. Install the sensor with the bolt.

    Torque: 9.0 Nm (92 kgfcm, 80in.lbf)

  1. INSTALL AIR CLEANER ASSY

  2. CHECK CONNECTION OF VACUUM HOSE

    More about Ignition:

    Ignition system (2AZ−FE)(From July, 2003)

    VVT sensor (1MZ−FE/3MZ−FE)

    Crankshaft position sensor (1MZ−FE/3MZ−FE)

    Ignition system (2AZ−FE)(From July, 2003)

    Camshaft position sensor (2AZ−FE)(From July, 2003)

    Crankshaft position sensor (2AZ−FE)(From July, 2003)

    Ignition system (1MZ−FE/3MZ−FE)

    Toyota Camry Service Manual / Ignition / Camshaft position sensor (2AZ−FE)(From July, 2003)

    Toyota Camry Service Manual

    Categories


    2011-2017 Copyright www.tcamanual.com