Toyota Camry manuals

Toyota
Toyota Camry
 Service Manual
Ignition
Crankshaft position sensor (1MZ−FE/3MZ−FE)

REPLACEMENT

HINT: A bolt without torque specification is a standard bolt.

1. REMOVE ENGINE UNDER COVER RH

a. Remove the 5 screws, 3 clips and the under cover.

Remove engine under cover RH Remove engine under cover RH

2. REMOVE FRONT FENDER APRON SEAL RH

a. Remove the clip, 2 bolts and apron seal.

Remove front fender apron seal RH Remove front fender apron seal RH

3. REMOVE CRANKSHAFT POSITION SENSOR

  1. Disconnect the sensor connector.
  2. Remove the bolt and sensor.

 Remove crankshaft position sensor  Remove crankshaft position sensor

  1. INSTALL CRANKSHAFT POSITION SENSOR Torque: 8.0 Nm (82 kgfcm, 71 in.lbf)

  2. INSTALL FRONT FENDER APRON SEAL RH

  3. INSTALL ENGINE UNDER COVER RH

    More about Ignition:

    Ignition system (2AZ−FE)(From July, 2003)

    VVT sensor (1MZ−FE/3MZ−FE)

    Crankshaft position sensor (1MZ−FE/3MZ−FE)

    Ignition system (2AZ−FE)(From July, 2003)

    Camshaft position sensor (2AZ−FE)(From July, 2003)

    Crankshaft position sensor (2AZ−FE)(From July, 2003)

    Ignition system (1MZ−FE/3MZ−FE)

    Toyota Camry Service Manual / Ignition / Crankshaft position sensor (1MZ−FE/3MZ−FE)

    Toyota Camry Service Manual

    Categories


    2011-2017 Copyright www.tcamanual.com