Toyota Camry

 XV30 (2002–2006) Service Manual

Lighting
Headlamp assy LH

COMPONENTS

OVERHAUL

HINT:

• COMPONENTS:
• Use the same procedures for the RH side and LH side.
• The procedures listed below are for the LH side.
• Installation is in the reverse order of removal.

1. REMOVE FRONT BUMPER ASSY

2. REMOVE HEADLAMP ASSY LH

1.  Remove the 2 bolts and disengage the pin.
2. Pull the headlamp assy LH in the direction indicated by the arrow and remove the headlamp assy LH.

Remove headlamp assy LH

3. REMOVE HEADLAMP, No.2 BULB

a. Turn in the direction indicated by the arrow and remove the headlamp, No.2 bulb.

Remove headlamp, No.2 Bulb

4. REMOVE HEADLAMP, No.1 BULB

a. Turn in the direction indicated by the arrow and remove the headlamp, No.1 bulb.

Remove headlamp, No.1 Bulb

5. REMOVE FRONT TURN SIGNAL LAMP BULB

a. Turn in the direction indicated by the arrow and remove the socket plug assy and the front turn signal lamp bulb as a unit.

2. Turn in the direction indicated by the arrow and remove the front turn signal lamp bulb.
3. Remove the socket plug assy.

6. REMOVE CLEARANCE LAMP BULB

1. Turn in the direction indicated by the arrow and remove the headlamp housing RH and the clearance lamp bulb as a unit.
2. Remove the clearance lamp bulb from the headlamp housing RH.

Remove clearance lamp bulb

7. VEHICLE PREPARATION FOR HEADLAMP AIM ADJUSTMENT

8. PREPARATION FOR HEADLAMP AIMING (Using a screen)

9. HEADLAMP AIMING INSPECTION

10. HEADLAMP AIMING ADJUSTMENT

11. VEHICLE PREPARATION FOR FOG LAMP AIM ADJUSTMENT

12. PREPARATION FOR FOG LAMP AIMING

13. FOG LAMP AIMING INSPECTION

14. FOG LAMP AIMING ADJUSTMENT

Lighting system

Headlamp assy LH

Fog lamp assy LH

Lighting system

Rear combination lamp assy LH

License plate lamp assy

Center stop lamp assy

Headlamp dimmer switch assy

Lighting system

Headlamp assy LH