Toyota Camry manuals

Toyota
Toyota Camry
 Service Manual
Intake
Intake air control system (2AZ−FE (PZEV)) (From July, 2003)

INSPECTION

1. INSPECT INTAKE MANIFOLD RUNNER VALVE ASSY

a. Check the intake manifold runner valve.

1. Check that intake manifold runner valve shaft is not rickety.

NOTICE: Do not adjust the screw.

b. Check the intake manifold runner valve operation.

b. Check the intake manifold runner valve operation.

1. Apply battery positive and negative voltages across the terminals.

Standard

:

2. Check that the intake manifold runner valve opens

2. Check that the intake manifold runner valve opens and closes smoothly.

If the result is not as specified, replace the intake manifold runner valve assy.

NOTICE: Do not apply the battery voltage to the intake manifold runner valve for more than 1 minute.

c. Check the resistance.

c. Check the resistance.

1. Using an ohmmeter, measure the resistance between the terminals.

Standard

:

If the result is not as specified, replace the intake manifold runner

If the result is not as specified, replace the intake manifold runner valve assy.

Intake manifold runner valve assy (2AZ−FE (PZEV))

    More about Intake:

    Intake air control system (2AZ−FE (PZEV)) (From July, 2003)

    Intake air control valve assy No.1 (1MZ−FE)

    Intake air control valve assy No.2 (1MZ−FE/3MZ−FE)

    Intake air control system (2AZ−FE (PZEV)) (From July, 2003)

    Intake manifold runner valve assy (2AZ−FE (PZEV)) (From July, 2003)

    Intake air control system (1MZ−FE/3MZ−FE)

    Toyota Camry Service Manual / Intake / Intake air control system (2AZ−FE (PZEV)) (From July, 2003)

    Toyota Camry Service Manual

    Categories


    2011-2017 Copyright www.tcamanual.com