Toyota Camry manuals

Toyota
Toyota Camry
 Service Manual
Automatic transmission / trans
Automatic transaxle fluid (ATM)

ON−VEHICLE INSPECTION

1. CHECK FLUID LEVEL

HINT: Drive the vehicle so that the engine and transaxle are at the normal operating temperature.

Fluid temperature: 70 to 80 C (158 to 176 F)


Check fluid level

  1. Park the vehicle on a level surface and set the parking brake.
  2. With the engine idling and the brake pedal depressed, shift the lever into all positions from the P to the L position, and return to the P position.
  3. Pull out the dipstick and wipe it clean.
  4. Push it back fully into the pipe.
  5. Pull it out and check that the fluid level is within the HOT range.

If there are leaks, it is necessary to repair or replace O−rings, FIPGs, oil seals, plugs or other parts.

    More about Automatic transmission / trans:

    Automatic transaxle assy (ATM)

    Automatic transaxle assy (U250E)

    Automatic transaxle fluid (ATM)

    Torque converter clutch and drive plate (ATM)

    Transmission revolution (ATM)

    Park/neutral position switch assy (ATM)

    Transmission wire (U151E)

    Transmission wire (U250E)

    Transmission valve body assy (U151E)

    Transmission valve body assy (U151E)

    Transmission valve body assy (U250E)

    Front differential oil seal (U151E)

    Front differential oil seal (U250E)

    Shift lock system (ATM)

    Floor shift assy (ATM)

    Floor shift assy (ATM)

    Transmission control cable assy (ATM)

    Floor shift parking lock cable assy (ATM)

    Park/neutral position switch assy (ATM)

    Automatic transaxle assy (U151E)

    Toyota Camry Service Manual / Automatic transmission / trans / Automatic transaxle fluid (ATM)

    Toyota Camry Service Manual

    Categories


    2011-2017 Copyright www.tcamanual.com