Toyota Camry

 XV30 (2002–2006) Service Manual

Manual transmission/transaxle
Front differential oil seal

REPLACEMENT

1. DRAIN MANUAL TRANSAXLE OIL Torque: 49 N·m (500 kgf·cm, 36 ft·lbf)

2. REMOVE FRONT WHEELS

3. REMOVE FRONT DRIVE SHAFT ASSY LH

   SST 09520−01010, 09520−24010 (09520−32040)

4. REMOVE FRONT DRIVE SHAFT ASSY RH

5. REMOVE FRONT TRANSAXLE CASE COVER OIL SEAL

a. Using SST, remove the oil seal.

SST 09308−00010

Remove front transaxle case cover oil seal

6. REMOVE TRANSMISSION CASE OIL SEAL

a. Using SST, remove the oil seal.

SST 09308−00010

Remove transmission case oil seal

7. INSTALL FRONT TRANSAXLE CASE COVER OIL SEAL

1. Coat a new oil seal lip with MP grease.
2. Using SST and a hammer, install the oil seal.

   SST 09608−10010, 09950−70010 (09951−07200) Drive in depth: 0 0.5 mm (0 0.020 in.)

NOTICE: Be careful not to damage the oil seal lip.

Install front transaxle case cover oil seal

8. INSTALL TRANSMISSION CASE OIL SEAL

1. Coat a new oil seal lip with MP grease.
2. Using SST and a hammer, install the oil seal.

   SST 09608−32010, 09950−70010 (09951−07200) Drive in depth: 3.5 0.5 mm (0.138 0.020 in.)

NOTICE: Be careful not to damage the oil seal lip.

 Install transmission case oil seal

9. INSTALL FRONT DRIVE SHAFT ASSY LH

10. INSTALL FRONT DRIVE SHAFT ASSY RH

11. INSTALL FRONT WHEELS Torque: 103 N·m (1,050 kgf·cm, 76 ft·lbf)

12. ADD MANUAL TRANSAXLE OIL

    Oil grade: API GL−4 or GL−5 Viscosity: SAE 75W−90 Capacity: 2.5 liters (2.6 US qts, 2.2 lmp. qts) Torque: 49 N·m (500 kgf·cm, 36 ft·lbf)

Add manual transaxle oil

13. INSPECT AND ADJUST MANUAL TRANSAXLE OIL

14. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT

15. CHECK ABS SPEED SENSOR SIGNAL

Manual transaxle system

Manual transaxle assy (From July, 2003)

Manual transaxle assy (E351)

Manual transaxle oil

Front differential oil seal

Floor shift shift lever assy

Input shaft assy (E351)

Output shaft assy (E351)

Floor shift cable transmission control shift

Shift & select lever shaft assy (E351)

Differential case assy (E351)

Floor shift cable transmission control select