Toyota Camry

 XV30 (2002–2006) Service Manual

Ignition
VVT sensor (1MZ−FE/3MZ−FE)

REPLACEMENT

HINT: A bolt without torque specification is a standard bolt .

1. REMOVE AIR CLEANER INLET ASSY

2. REMOVE AIR CLEANER ASSY

3. REMOVE VVT SENSOR

1. Disconnect the sensor connector.
2. Remove the bolt and sensor.

Remove VVT sensor

4. INSTALL VVT SENSOR

1. Apply a light coat of engine oil to the O−ring on the sensor.
2. Install the sensor with the bolt.

   Torque: 8.0 N·m (82 kgf·cm, 71 in.·lbf)

3. Connect the sensor connector.

5. INSTALL AIR CLEANER ASSY

6. INSTALL AIR CLEANER INLET ASSY

7. CHECK CONNECTION OF VACUUM HOSE

Ignition system (2AZ−FE)(From July, 2003)

VVT sensor (1MZ−FE/3MZ−FE)

Crankshaft position sensor (1MZ−FE/3MZ−FE)

Ignition system (2AZ−FE)(From July, 2003)

Camshaft position sensor (2AZ−FE)(From July, 2003)

Crankshaft position sensor (2AZ−FE)(From July, 2003)

Ignition system (1MZ−FE/3MZ−FE)