Toyota Camry manuals

Toyota
Toyota Camry
 Service Manual
Engine mechanical
Drive belt (1MZ−FE/3MZ−FE)

REPLACEMENT

  1. REMOVE FRONT WHEEL RH

  2. REMOVE FRONT FENDER APRON SEAL RH

  3. REMOVE V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT No

    .1

  1. Loosen bolts A and B.

  2.  Loosen adjusting bolt C and remove the belt.

 Remove V (cooler compressor to crankshaft pulley) belt No.1  Remove V (cooler compressor to crankshaft pulley) belt No.1

4. REMOVE VANE PUMP V BELT

a. Loosen bolts A and B, and remove the belt.


Remove vane pump V belt

5. INSTALL VANE PUMP V BELT

  1. Install the belt on each pulley.

  2.  Using a bar, adjust the belt tension and tighten bolt B.

    Torque: 43 Nm (439 kgfcm, 32 ftlbf)

  3. Tighten bolt A.

    Torque: 43 Nm (439 kgfcm, 32 ftlbf)


Install vane pump V belt

6. INSTALL V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT No.1

  1. Install the belt on each pulley.

  2. Tighten adjusting bolt C, and adjust the belt tension.

  3. First tighten bolt A, then B.

    Torque:
    58 Nm (591 kgfcm, 43 ftlbf) for bolt A 18 Nm (184 kgfcm, 13 ftlbf) for bolt B


Install V (cooler compressor to crankshaft pulley) belt No.1

  1. INSPECT DRIVE BELT TENSION

  2. INSTALL FRONT WHEEL RH

    More about Engine mechanical:

    Engine (2AZ−FE) (From July, 2003)

    Timing gear case or timing chain case oil seal (2AZ−FE)(From July, 2003)

    Engine rear oil seal (2AZ−FE)(From July, 2003)

    Cylinder head assy (2AZ−FE) (From July, 2003)

    Cylinder block assy (2AZ−FE)(From July, 2003)

    Engine (1MZ−FE/3MZ−FE)

    Drive belt (1MZ−FE/3MZ−FE)

    Valve clearance (1MZ−FE/3MZ−FE)

    Partial engine assy (1MZ−FE/3MZ−FE)

    Partial engine assy (2AZ−FE)(From July, 2003)

    Partial engine assy (1MZ−FE/3MZ−FE)

    Timing belt (1MZ−FE/3MZ−FE)

    Camshaft (RH BANK) (1MZ−FE/3MZ−FE)

    Camshaft (LH BANK) (1MZ−FE/3MZ−FE)

    Cylinder head gasket (1MZ−FE/3MZ−FE)

    Cylinder head gasket No.2 (1MZ−FE/3MZ−FE)

    Oil pump seal (1MZ−FE/3MZ−FE)

    Engine rear oil seal (1MZ−FE/3MZ−FE)

    Cylinder head assy (1MZ−FE/3MZ−FE)

    Cylinder block assy (1MZ−FE/3MZ−FE)

    Partial engine assy (2AZ−FE)(From July, 2003)

    Drive belt (2AZ−FE)(From July, 2003)

    Valve clearance (2AZ−FE)

    Chain (2AZ−FE)(From July, 2003)

    Camshaft (2AZ−FE)(From July, 2003)

    Cylinder head gasket (2AZ−FE)(From July, 2003)

    Toyota Camry Service Manual / Engine mechanical / Drive belt (1MZ−FE/3MZ−FE)

    Toyota Camry Service Manual

    Categories


    2011-2019 Copyright www.tcamanual.com