Toyota Camry manuals

Toyota
Toyota Camry
 XV30 (2002–2006) Service Manual
Manual transmission/transaxle
Floor shift cable transmission control select

REPLACEMENT

  1. REMOVE INSTRUMENT PANEL SAFETY PAD SUB−ASSY

  2. REMOVE AIR CONDITIONING RADIATOR ASSY

  3. REMOVE AIR BAG SENSOR ASSY CENTER

  4. REMOVE FLOOR SHIFT CABLE TRANSMISSION CONTROL SELECT

  1. Remove the clip and washer and separate the top of the select cable from the transaxle.

  2.  Remove the clip and select cable from the control cable bracket.

  3. Turn the lock and separate the select cable from the shift lever retainer.

  4. Remove the clip and separate the top of the select cable from the shift lever assy.

  5. Remove the 2 retainer set bolts from the floor.

  6. Separate the retainer from the grommet.

  7. Remove the select cable from the grommet.

  8. Remove the select cable through the floor hole and retainer.

Remove floor shift cable transmission control select Remove floor shift cable transmission control select

5. INSTALL FLOOR SHIFT CABLE TRANSMISSION CONTROL SELECT

  1. Put the select cable through the floor hole and retainer.

  2. Install the select cable to the grommet.

  3. Install the retainer to the grommet.

NOTICE: Fit 3 projections of the grommet into 3 holes of the retainer.

d. Install the 2 retainer set bolts.

Torque: 5.0 N·m (51 kgf·cm, 44 in.·lbf)

e. Connect the select cable to the shift lever retainer.

e. Connect the select cable to the shift lever retainer.

NOTICE:

  • The projecting part of the cable outer should face upward when the select cable is installed.

  • Make sure that after installation the cable outer lock is projecting from A shown in the illustration.

f. Connect the top of the select cable to the shift lever assy

f. Connect the top of the select cable to the shift lever assy and install the clip.

NOTICE: The serrate part of the select cable point should face upward when the select cable point is connected.

the clip should be inserted to the direction shown in the illustration.

  1. Connect the top of the select cable to the shift lever assy and install the clip.

  2. Connect the select cable to the control cable bracket and install a new clip.

  3. Connect the select cable to the transaxle and install the washer and clip.

  1. INSTALL AIR BAG SENSOR ASSY CENTER

  2. INSTALL AIR CONDITIONING RADIATOR ASSY

  3. INSTALL INSTRUMENT PANEL SAFETY PAD SUB−ASSY

  4. INSPECT SRS WARNING LIGHT

    More about «Manual transmission/transaxle»:

    Manual transaxle system

    Manual transaxle assy (From July, 2003)

    Manual transaxle assy (E351)

    Manual transaxle oil

    Front differential oil seal

    Floor shift shift lever assy

    Input shaft assy (E351)

    Output shaft assy (E351)

    Floor shift cable transmission control shift

    Shift & select lever shaft assy (E351)

    Differential case assy (E351)

    Floor shift cable transmission control select

    Toyota Camry XV30 (2002–2006) Service Manual / Manual transmission/transaxle / Floor shift cable transmission control select

    Toyota Camry XV30 (2002–2006) Service Manual

    Categories


    © 2011-2024 Copyright www.tcamanual.com