Toyota Camry
XV30 (2002–2006) Service Manual
Manual transmission/transaxle
Floor shift cable transmission control shift
REPLACEMENT
- REMOVE INSTRUMENT PANEL SAFETY PAD SUB−ASSY
- REMOVE AIR CONDITIONING RADIATOR ASSY
- REMOVE AIR BAG SENSOR ASSY CENTER
- REMOVE FLOOR SHIFT CABLE TRANSMISSION
CONTROL SHIFT
- Remove the clip and washer and separate the top of the
shift cable from the transaxle.
- Remove the clip and shift cable from the control cable
bracket.
- Turn the lock and separate the shift cable from the shift
lever retainer.
- Separate the top of the shift cable from the shift lever
assy.
- Remove the 2 retainer set bolts from the floor.
- Separate the retainer from the grommet.
- Remove the select cable from the grommet.
- Remove the shift cable through the floor hole and retainer.
Remove floor shift cable transmission control shift
5. INSTALL FLOOR SHIFT CABLE TRANSMISSION
CONTROL SHIFT
- Put the shift cable through the floor hole and retainer.
- Install the select cable to the grommet.
- Install the retainer to the grommet.
NOTICE:
Fit 3 projections of the grommet into 3 holes of the retainer.
d. Install the 2 retainer set bolts.
Torque: 5.0 N·m (51 kgf·cm, 44 in.·lbf)
Install floor shift cable transmission control shift
e. Connect the shift cable to the shift lever retainer.
NOTICE:
- The projecting part of the cable outer should face upward
when the shift cable is installed.
- Make sure that after installation the cable outer lock
is projecting from A shown in the illustration.
- Install the top of the shift cable to the shift lever assy.
- Connect the shift cable to the control cable bracket and
install a new clip.
- Connect the shift cable to the transaxle and install the
washer and clip.
- INSTALL AIR BAG SENSOR ASSY CENTER
- INSTALL AIR CONDITIONING RADIATOR ASSY
- INSTALL INSTRUMENT PANEL SAFETY PAD SUB−ASSY
- INSPECT SRS WARNING LIGHT
More about «Manual transmission/transaxle»:
Floor shift cable transmission control shift