REPLACEMENT
REMOVE FRONT WHEELS
REMOVE ENGINE UNDER COVER RH
REMOVE ENGINE UNDER COVER LH
DRAIN AUTOMATIC TRANSAXLE FLUID
Remove the drain plug and gasket, and drain the ATF.
Install a new gasket and the drain plug.
Torque: 49 N·m (500 kgf·cm, 36 ft·lbf)
REMOVE FRONT DRIVE SHAFT ASSY RH
REMOVE FRONT DRIVE SHAFT ASSY LH
SST 09520−01010, 09520−24010 (09520−32040)
REMOVE TRANSAXLE HOUSING OIL SEAL
Using SST, pull out the oil seal.
SST 09308−00010
Remove transaxle housing oil seal
8. REMOVE DIFFERENTIAL SIDE BEARING RETAINER OIL SEAL
Using SST, pull out the oil seal.
SST 09308−00010
Remove differential side bearing retainer oil seal
9. INSTALL TRANSAXLE HOUSING OIL SEAL
Using SST and a hammer, drive in a new oil seal.
SST 09316−60011 (09316−00011) Oil seal drive in depth: 0 0.5 mm (0 0.020 in.)
Coat the lip of the oil seal with MP grease.
Install transaxle housing oil seal
10. INSTALL DIFFERENTIAL SIDE BEARING RETAINER OIL SEAL
Using SST and a hammer, drive in a new oil seal.
SST 09649−17010, 09950−70010 (09951−07150) Oil seal drive in depth: 0 0.5 mm (0 0.020 in.)
Coat the lip of the oil seal with MP grease.
Install differential side bearing retainer oil seal
INSTALL FRONT DRIVE SHAFT ASSY LH
INSTALL FRONT DRIVE SHAFT ASSY RH
INSTALL ENGINE UNDER COVER LH
INSTALL ENGINE UNDER COVER RH
INSTALL FRONT WHEELS Torque: 103 N·m (1,050 kgf·cm, 76 ft·lbf)
ADD AUTOMATIC TRANSAXLE FLUID Fluid type: ATF type T−IV Capacity: 3.5 liters (3.7 US qts, 3.1 lmp. qts)
INSPECT AUTOMATIC TRANSAXLE FLUID